plotly.graph_objects.scatter3d package¶

class plotly.graph_objects.scatter3d.ErrorX(arg=None, array=None, arrayminus=None, color=None, copy_zstyle=None, symmetric=None, thickness=None, traceref=None, tracerefminus=None, type=None, value=None, valueminus=None, visible=None, width=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property array¶

Sets the data corresponding the length of each error bar. Values are plotted relative to the underlying data.

The ‘array’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property arrayminus¶

Sets the data corresponding the length of each error bar in the bottom (left) direction for vertical (horizontal) bars Values are plotted relative to the underlying data.

The ‘arrayminus’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property color¶

Sets the stroke color of the error bars.

The ‘color’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

Returns

Return type

str

property copy_zstyle¶
The ‘copy_zstyle’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property symmetric¶

Determines whether or not the error bars have the same length in both direction (top/bottom for vertical bars, left/right for horizontal bars.

The ‘symmetric’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property thickness¶

Sets the thickness (in px) of the error bars.

The ‘thickness’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property traceref¶
The ‘traceref’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property tracerefminus¶
The ‘tracerefminus’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property type¶

Determines the rule used to generate the error bars. If “constant”, the bar lengths are of a constant value. Set this constant in value. If “percent”, the bar lengths correspond to a percentage of underlying data. Set this percentage in value. If “sqrt”, the bar lengths correspond to the square of the underlying data. If “data”, the bar lengths are set with data set array.

The ‘type’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘percent’, ‘constant’, ‘sqrt’, ‘data’]

Returns

Return type

Any

property value¶

Sets the value of either the percentage (if type is set to “percent”) or the constant (if type is set to “constant”) corresponding to the lengths of the error bars.

The ‘value’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property valueminus¶

Sets the value of either the percentage (if type is set to “percent”) or the constant (if type is set to “constant”) corresponding to the lengths of the error bars in the bottom (left) direction for vertical (horizontal) bars

The ‘valueminus’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property visible¶

Determines whether or not this set of error bars is visible.

The ‘visible’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property width¶

Sets the width (in px) of the cross-bar at both ends of the error bars.

The ‘width’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

class plotly.graph_objects.scatter3d.ErrorY(arg=None, array=None, arrayminus=None, color=None, copy_zstyle=None, symmetric=None, thickness=None, traceref=None, tracerefminus=None, type=None, value=None, valueminus=None, visible=None, width=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property array¶

Sets the data corresponding the length of each error bar. Values are plotted relative to the underlying data.

The ‘array’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property arrayminus¶

Sets the data corresponding the length of each error bar in the bottom (left) direction for vertical (horizontal) bars Values are plotted relative to the underlying data.

The ‘arrayminus’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property color¶

Sets the stroke color of the error bars.

The ‘color’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

Returns

Return type

str

property copy_zstyle¶
The ‘copy_zstyle’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property symmetric¶

Determines whether or not the error bars have the same length in both direction (top/bottom for vertical bars, left/right for horizontal bars.

The ‘symmetric’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property thickness¶

Sets the thickness (in px) of the error bars.

The ‘thickness’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property traceref¶
The ‘traceref’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property tracerefminus¶
The ‘tracerefminus’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property type¶

Determines the rule used to generate the error bars. If “constant”, the bar lengths are of a constant value. Set this constant in value. If “percent”, the bar lengths correspond to a percentage of underlying data. Set this percentage in value. If “sqrt”, the bar lengths correspond to the square of the underlying data. If “data”, the bar lengths are set with data set array.

The ‘type’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘percent’, ‘constant’, ‘sqrt’, ‘data’]

Returns

Return type

Any

property value¶

Sets the value of either the percentage (if type is set to “percent”) or the constant (if type is set to “constant”) corresponding to the lengths of the error bars.

The ‘value’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property valueminus¶

Sets the value of either the percentage (if type is set to “percent”) or the constant (if type is set to “constant”) corresponding to the lengths of the error bars in the bottom (left) direction for vertical (horizontal) bars

The ‘valueminus’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property visible¶

Determines whether or not this set of error bars is visible.

The ‘visible’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property width¶

Sets the width (in px) of the cross-bar at both ends of the error bars.

The ‘width’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

class plotly.graph_objects.scatter3d.ErrorZ(arg=None, array=None, arrayminus=None, color=None, symmetric=None, thickness=None, traceref=None, tracerefminus=None, type=None, value=None, valueminus=None, visible=None, width=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property array¶

Sets the data corresponding the length of each error bar. Values are plotted relative to the underlying data.

The ‘array’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property arrayminus¶

Sets the data corresponding the length of each error bar in the bottom (left) direction for vertical (horizontal) bars Values are plotted relative to the underlying data.

The ‘arrayminus’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property color¶

Sets the stroke color of the error bars.

The ‘color’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

Returns

Return type

str

property symmetric¶

Determines whether or not the error bars have the same length in both direction (top/bottom for vertical bars, left/right for horizontal bars.

The ‘symmetric’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property thickness¶

Sets the thickness (in px) of the error bars.

The ‘thickness’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property traceref¶
The ‘traceref’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property tracerefminus¶
The ‘tracerefminus’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property type¶

Determines the rule used to generate the error bars. If “constant”, the bar lengths are of a constant value. Set this constant in value. If “percent”, the bar lengths correspond to a percentage of underlying data. Set this percentage in value. If “sqrt”, the bar lengths correspond to the square of the underlying data. If “data”, the bar lengths are set with data set array.

The ‘type’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘percent’, ‘constant’, ‘sqrt’, ‘data’]

Returns

Return type

Any

property value¶

Sets the value of either the percentage (if type is set to “percent”) or the constant (if type is set to “constant”) corresponding to the lengths of the error bars.

The ‘value’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property valueminus¶

Sets the value of either the percentage (if type is set to “percent”) or the constant (if type is set to “constant”) corresponding to the lengths of the error bars in the bottom (left) direction for vertical (horizontal) bars

The ‘valueminus’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property visible¶

Determines whether or not this set of error bars is visible.

The ‘visible’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property width¶

Sets the width (in px) of the cross-bar at both ends of the error bars.

The ‘width’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

class plotly.graph_objects.scatter3d.Hoverlabel(arg=None, align=None, bgcolor=None, bordercolor=None, font=None, namelength=None, showarrow=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property align¶

Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

The ‘align’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘left’, ‘right’, ‘auto’]

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property bgcolor¶

Sets the background color of the hover labels for this trace

The ‘bgcolor’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

  • A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property bordercolor¶

Sets the border color of the hover labels for this trace.

The ‘bordercolor’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

  • A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property font¶

Sets the font used in hover labels.

The ‘font’ property is an instance of Font that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.hoverlabel.Font

property namelength¶

Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to namelength - 3 characters and add an ellipsis.

The ‘namelength’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [-1, 9223372036854775807]

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|numpy.ndarray

property showarrow¶

Sets whether or not to show the hover label arrow/triangle pointing to the data point.

The ‘showarrow’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

class plotly.graph_objects.scatter3d.Legendgrouptitle(arg=None, font=None, text=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property font¶

Sets this legend group’s title font.

The ‘font’ property is an instance of Font that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.legendgrouptitle.Font

property text¶

Sets the title of the legend group.

The ‘text’ property is a string and must be specified as:

  • A string

  • A number that will be converted to a string

Returns

Return type

str

class plotly.graph_objects.scatter3d.Line(arg=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, color=None, coloraxis=None, colorbar=None, colorscale=None, dash=None, reversescale=None, showscale=None, width=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property autocolorscale¶

Determines whether the colorscale is a default palette (autocolorscale: true) or the palette determined by line.colorscale. Has an effect only if in line.color is set to a numerical array. In case colorscale is unspecified or autocolorscale is true, the default palette will be chosen according to whether numbers in the color array are all positive, all negative or mixed.

The ‘autocolorscale’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property cauto¶

Determines whether or not the color domain is computed with respect to the input data (here in line.color) or the bounds set in line.cmin and line.cmax Has an effect only if in line.color is set to a numerical array. Defaults to false when line.cmin and line.cmax are set by the user.

The ‘cauto’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property cmax¶

Sets the upper bound of the color domain. Has an effect only if in line.color is set to a numerical array. Value should have the same units as in line.color and if set, line.cmin must be set as well.

The ‘cmax’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property cmid¶

Sets the mid-point of the color domain by scaling line.cmin and/or line.cmax to be equidistant to this point. Has an effect only if in line.color is set to a numerical array. Value should have the same units as in line.color. Has no effect when line.cauto is false.

The ‘cmid’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property cmin¶

Sets the lower bound of the color domain. Has an effect only if in line.color is set to a numerical array. Value should have the same units as in line.color and if set, line.cmax must be set as well.

The ‘cmin’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property color¶

Sets the line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to line.cmin and line.cmax if set.

The ‘color’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

  • A number that will be interpreted as a color according to scatter3d.line.colorscale

  • A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property coloraxis¶

Sets a reference to a shared color axis. References to these shared color axes are “coloraxis”, “coloraxis2”, “coloraxis3”, etc. Settings for these shared color axes are set in the layout, under layout.coloraxis, layout.coloraxis2, etc. Note that multiple color scales can be linked to the same color axis.

The ‘coloraxis’ property is an identifier of a particular subplot, of type ‘coloraxis’, that may be specified as:

  • the string ‘coloraxis’ optionally followed by an integer >= 1 (e.g. ‘coloraxis’, ‘coloraxis1’, ‘coloraxis2’, ‘coloraxis3’, etc.)

Returns

Return type

str

property colorbar¶

The ‘colorbar’ property is an instance of ColorBar that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.line.ColorBar

property colorscale¶

Sets the colorscale. Has an effect only if in line.color is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsla, hwb, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, use line.cmin and line.cmax. Alternatively, colorscale may be a palette name string of the following list: Blackbody,Bluered, Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portla nd,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

The ‘colorscale’ property is a colorscale and may be specified as:

  • A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package.

  • A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, ‘green’], [0.5, ‘red’], [1.0, ‘rgb(0, 0, 255)’]])

  • One of the following named colorscales:
    [‘aggrnyl’, ‘agsunset’, ‘algae’, ‘amp’, ‘armyrose’, ‘balance’,

    ‘blackbody’, ‘bluered’, ‘blues’, ‘blugrn’, ‘bluyl’, ‘brbg’, ‘brwnyl’, ‘bugn’, ‘bupu’, ‘burg’, ‘burgyl’, ‘cividis’, ‘curl’, ‘darkmint’, ‘deep’, ‘delta’, ‘dense’, ‘earth’, ‘edge’, ‘electric’, ‘emrld’, ‘fall’, ‘geyser’, ‘gnbu’, ‘gray’, ‘greens’, ‘greys’, ‘haline’, ‘hot’, ‘hsv’, ‘ice’, ‘icefire’, ‘inferno’, ‘jet’, ‘magenta’, ‘magma’, ‘matter’, ‘mint’, ‘mrybm’, ‘mygbm’, ‘oranges’, ‘orrd’, ‘oryel’, ‘oxy’, ‘peach’, ‘phase’, ‘picnic’, ‘pinkyl’, ‘piyg’, ‘plasma’, ‘plotly3’, ‘portland’, ‘prgn’, ‘pubu’, ‘pubugn’, ‘puor’, ‘purd’, ‘purp’, ‘purples’, ‘purpor’, ‘rainbow’, ‘rdbu’, ‘rdgy’, ‘rdpu’, ‘rdylbu’, ‘rdylgn’, ‘redor’, ‘reds’, ‘solar’, ‘spectral’, ‘speed’, ‘sunset’, ‘sunsetdark’, ‘teal’, ‘tealgrn’, ‘tealrose’, ‘tempo’, ‘temps’, ‘thermal’, ‘tropic’, ‘turbid’, ‘turbo’, ‘twilight’, ‘viridis’, ‘ylgn’, ‘ylgnbu’, ‘ylorbr’, ‘ylorrd’].

    Appending ‘_r’ to a named colorscale reverses it.

Returns

Return type

str

property dash¶

Sets the dash style of the lines.

The ‘dash’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘dash’, ‘dashdot’, ‘dot’, ‘longdash’, ‘longdashdot’, ‘solid’]

Returns

Return type

Any

property reversescale¶

Reverses the color mapping if true. Has an effect only if in line.color is set to a numerical array. If true, line.cmin will correspond to the last color in the array and line.cmax will correspond to the first color.

The ‘reversescale’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property showscale¶

Determines whether or not a colorbar is displayed for this trace. Has an effect only if in line.color is set to a numerical array.

The ‘showscale’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property width¶

Sets the line width (in px).

The ‘width’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

class plotly.graph_objects.scatter3d.Marker(arg=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, color=None, coloraxis=None, colorbar=None, colorscale=None, line=None, opacity=None, reversescale=None, showscale=None, size=None, sizemin=None, sizemode=None, sizeref=None, symbol=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property autocolorscale¶

Determines whether the colorscale is a default palette (autocolorscale: true) or the palette determined by marker.colorscale. Has an effect only if in marker.color is set to a numerical array. In case colorscale is unspecified or autocolorscale is true, the default palette will be chosen according to whether numbers in the color array are all positive, all negative or mixed.

The ‘autocolorscale’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property cauto¶

Determines whether or not the color domain is computed with respect to the input data (here in marker.color) or the bounds set in marker.cmin and marker.cmax Has an effect only if in marker.color is set to a numerical array. Defaults to false when marker.cmin and marker.cmax are set by the user.

The ‘cauto’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property cmax¶

Sets the upper bound of the color domain. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color and if set, marker.cmin must be set as well.

The ‘cmax’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property cmid¶

Sets the mid-point of the color domain by scaling marker.cmin and/or marker.cmax to be equidistant to this point. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color. Has no effect when marker.cauto is false.

The ‘cmid’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property cmin¶

Sets the lower bound of the color domain. Has an effect only if in marker.color is set to a numerical array. Value should have the same units as in marker.color and if set, marker.cmax must be set as well.

The ‘cmin’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property color¶

Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to marker.cmin and marker.cmax if set.

The ‘color’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

  • A number that will be interpreted as a color according to scatter3d.marker.colorscale

  • A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property coloraxis¶

Sets a reference to a shared color axis. References to these shared color axes are “coloraxis”, “coloraxis2”, “coloraxis3”, etc. Settings for these shared color axes are set in the layout, under layout.coloraxis, layout.coloraxis2, etc. Note that multiple color scales can be linked to the same color axis.

The ‘coloraxis’ property is an identifier of a particular subplot, of type ‘coloraxis’, that may be specified as:

  • the string ‘coloraxis’ optionally followed by an integer >= 1 (e.g. ‘coloraxis’, ‘coloraxis1’, ‘coloraxis2’, ‘coloraxis3’, etc.)

Returns

Return type

str

property colorbar¶

The ‘colorbar’ property is an instance of ColorBar that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.marker.ColorBar

property colorscale¶

Sets the colorscale. Has an effect only if in marker.color is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsla, hwb, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, use marker.cmin and marker.cmax. Alternatively, colorscale may be a palette name string of the following list: Blackbody,B luered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic ,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

The ‘colorscale’ property is a colorscale and may be specified as:

  • A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package.

  • A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, ‘green’], [0.5, ‘red’], [1.0, ‘rgb(0, 0, 255)’]])

  • One of the following named colorscales:
    [‘aggrnyl’, ‘agsunset’, ‘algae’, ‘amp’, ‘armyrose’, ‘balance’,

    ‘blackbody’, ‘bluered’, ‘blues’, ‘blugrn’, ‘bluyl’, ‘brbg’, ‘brwnyl’, ‘bugn’, ‘bupu’, ‘burg’, ‘burgyl’, ‘cividis’, ‘curl’, ‘darkmint’, ‘deep’, ‘delta’, ‘dense’, ‘earth’, ‘edge’, ‘electric’, ‘emrld’, ‘fall’, ‘geyser’, ‘gnbu’, ‘gray’, ‘greens’, ‘greys’, ‘haline’, ‘hot’, ‘hsv’, ‘ice’, ‘icefire’, ‘inferno’, ‘jet’, ‘magenta’, ‘magma’, ‘matter’, ‘mint’, ‘mrybm’, ‘mygbm’, ‘oranges’, ‘orrd’, ‘oryel’, ‘oxy’, ‘peach’, ‘phase’, ‘picnic’, ‘pinkyl’, ‘piyg’, ‘plasma’, ‘plotly3’, ‘portland’, ‘prgn’, ‘pubu’, ‘pubugn’, ‘puor’, ‘purd’, ‘purp’, ‘purples’, ‘purpor’, ‘rainbow’, ‘rdbu’, ‘rdgy’, ‘rdpu’, ‘rdylbu’, ‘rdylgn’, ‘redor’, ‘reds’, ‘solar’, ‘spectral’, ‘speed’, ‘sunset’, ‘sunsetdark’, ‘teal’, ‘tealgrn’, ‘tealrose’, ‘tempo’, ‘temps’, ‘thermal’, ‘tropic’, ‘turbid’, ‘turbo’, ‘twilight’, ‘viridis’, ‘ylgn’, ‘ylgnbu’, ‘ylorbr’, ‘ylorrd’].

    Appending ‘_r’ to a named colorscale reverses it.

Returns

Return type

str

property line¶

The ‘line’ property is an instance of Line that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.marker.Line

property opacity¶

Sets the marker opacity. Note that the marker opacity for scatter3d traces must be a scalar value for performance reasons. To set a blending opacity value (i.e. which is not transparent), set “marker.color” to an rgba color and use its alpha channel.

The ‘opacity’ property is a number and may be specified as:

  • An int or float in the interval [0, 1]

Returns

Return type

int|float

property reversescale¶

Reverses the color mapping if true. Has an effect only if in marker.color is set to a numerical array. If true, marker.cmin will correspond to the last color in the array and marker.cmax will correspond to the first color.

The ‘reversescale’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property showscale¶

Determines whether or not a colorbar is displayed for this trace. Has an effect only if in marker.color is set to a numerical array.

The ‘showscale’ property is a boolean and must be specified as:

  • A boolean value: True or False

Returns

Return type

bool

property size¶

Sets the marker size (in px).

The ‘size’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray

property sizemin¶

Has an effect only if marker.size is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

The ‘sizemin’ property is a number and may be specified as:

  • An int or float in the interval [0, inf]

Returns

Return type

int|float

property sizemode¶

Has an effect only if marker.size is set to a numerical array. Sets the rule for which the data in size is converted to pixels.

The ‘sizemode’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘diameter’, ‘area’]

Returns

Return type

Any

property sizeref¶

Has an effect only if marker.size is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with sizemin and sizemode.

The ‘sizeref’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property symbol¶

Sets the marker symbol type.

The ‘symbol’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘circle’, ‘circle-open’, ‘cross’, ‘diamond’, ‘diamond-open’, ‘square’, ‘square-open’, ‘x’]

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

class plotly.graph_objects.scatter3d.Projection(arg=None, x=None, y=None, z=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property x¶

The ‘x’ property is an instance of X that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.projection.X

property y¶

The ‘y’ property is an instance of Y that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.projection.Y

property z¶

The ‘z’ property is an instance of Z that may be specified as:

Returns

Return type

plotly.graph_objects.scatter3d.projection.Z

class plotly.graph_objects.scatter3d.Textfont(arg=None, color=None, family=None, size=None, style=None, variant=None, weight=None, **kwargs)¶

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property color¶
The ‘color’ property is a color and may be specified as a string in the following formats:

  • hex or short hex (e.g. ‘#d3d3d3’, ‘#d3d’)

  • hex or short hex with alpha (e.g. ‘#d3d3d380’, ‘#d3d8’)

  • rgb (e.g. ‘rgb(255, 0, 0)’, ‘rgb(255 0 0)’)

  • rgba (e.g. ‘rgba(255, 0, 0, 0.5)’, ‘rgba(255 0 0 / 0.5)’)

  • hsl (e.g. ‘hsl(0, 100%, 50%)’, ‘hsl(0deg 100% 50%)’)

  • hsla (e.g. ‘hsla(0, 100%, 50%, 0.5)’, ‘hsla(0deg 100% 50% / 0.5)’)

  • hwb (e.g. ‘hwb(0 0% 100%)’)

  • lab/lch/oklab/oklch (e.g. ‘oklch(0.7 0.15 180)’)

  • color (e.g. ‘color(display-p3 1 0 0)’)

  • named colors (full list: https://www.w3.org/TR/css-color-4/#named-color)

  • Any other supported CSS 4 color format: https://www.w3.org/TR/css-color-4/

  • A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property family¶

HTML font family - the typeface that will be applied by the web browser. The web browser can only apply a font if it is available on the system where it runs. Provide multiple font families, separated by commas, to indicate the order in which to apply fonts if they aren’t available.

The ‘family’ property is a string and must be specified as:

  • A non-empty string

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

str|numpy.ndarray

property size¶
The ‘size’ property is a number and may be specified as:

  • An int or float in the interval [1, inf]

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|float|numpy.ndarray

property style¶

Sets whether a font should be styled with a normal or italic face from its family.

The ‘style’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘italic’]

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property variant¶

Sets the variant of the font.

The ‘variant’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘small-caps’]

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property weight¶

Sets the weight (or boldness) of the font.

The ‘weight’ property is an integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [1, 1000] OR exactly one of [‘normal’, ‘bold’] (e.g. ‘bold’)

  • A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|numpy.ndarray